Sata connector2/21/2023 ![]() ![]() Besides, the mainboard is able to place a very limited number of drives.īefore choosing this method, make sure that the computer power supply provides at least 15 Watts of additional power per drive.Īlso, see to it that you have a sufficient number of data cables: one cable per two IDE drives and one SATA data cable per one SATA drive. This is the cheapest but not the safest method to connect the drives. Pay attention to the external power supply: some adapters are powered via USB and don't match 3.5" hard drives used in NAS and desktop computers. Please note that some USB to SATA adapters have a pair of SATA interfaces, thus, to connect two SATA drives you need only one adapter. USB to SATA hard disk adapter with an external power supply. USB to IDE hard disk adapter with an external power supply. You can find external adapters for both SATA and IDE hard drives some of them fit both interfaces: * If the host computer provides enough disk space, you can create an image of your disk and avoid using an adapter for this disk. You need USB/Firewire adapters for each drive to connect them to the host PC. ![]() This is the safest but at the same time the most expensive method. Choosing the method of connection to the host computer. Please pay attention to the form of the connector that matches the "key" form of the SATA drive data slot. It makes no difference which of the ends will be used to connect the drive. It has a "key" form as well.Ī SATA cable consists of two equal endpoints on a thin data cable. In contrast to IDE, a SATA power cable is wider than a SATA data cable. Please pay attention to the "key" form of the slot. IDE cables usually have two drive connectors: a "master" connector (at the end of the cable) and a "slave" connector (in the middle of the cable, closer to the "master" connector). Please pay attention to the "key" on the cable connector that matches the slot of the drive. In this picture, the blue connector is used to connect the cable to the mainboard of the computer/device, while the black one is used to connect the drive.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |